Aerial Lift

Safe Work Practices During Operation

Implement the following practices during operation:

• Always close the lift platform chains or doors.
• Stand on the floor of the bucket or lift platform.
• Do not exceed the manufacturer's load capacity limits.
• Do not drive the lift with the bucket or platform raised, unless the manufacturer allows for this
.
• Do not exceed vertical or horizontal reach limits.
• Maintain a safe clearance from electrical lines.
• Do not operate an aerial lift in high winds above those recommended by the manufacturer.
• Do not override the hydraulic, mechanical, or electrical safety devices.
• Never use the aerial boom lift as a crane or other non-approved lifting device.
• Raise and lower the boom slowly.
• Watch out for obstacles such as tree limbs, power lines, and other similar hazards.
• Never slam a control switch.
• Stop work if something malfunctions.
• Barricade or section off the working area, and do not let anyone work, walk, or stand under a raised boom.
• Keep non-operational personnel at least 6 feet away from the equipment when in use.

To learn more about Aerial Lifts visit our OSHA Aerial Boom Lift Safety Online Training web page.